Hutmen LLC manufactures flat extruded bars and flat bars drawn, which are made according to the following standards: EN 12167, EN 13601, PN-H-93620-00, DIN 17672 and DIN 40500. These products are used in the production of electrical and mechanical devices.
Hutmen LLC manufactures flat extruded bars and flat bars drawn, which are made according to the following standards: EN 12167, EN 13601, PN-H-93620-00, DIN 17672 and DIN 40500. These products are used in the production of electrical and mechanical devices.
Production of flat bars drawn in three types of corners: sharp (SH), rounded (RD), semi-cicular (CE) in straight lengths or regular circles.
The dimensional range for straight lengths is from 10x3 to 120x25 in the following lengths:
Production of flat extruded bars in the dimensional range from 30x25 to 200x80 and complying with the value of base A to height B factor below 15.
Flat bars only in straight lengths in the exact or range lengths, upon prior arrangement in the range of 2 m to 6 m.
Technical data and range
|
Standard |
Copper grade |
Subject |
|---|---|---|
|
EN 12167:2016 |
Cu-DHP |
Profiles and rectangular rods |
|
EN 13601:2016 |
Cu-ETP |
Copper rods, flat bars and wires for general electrical purposes |
|
PN-H-93620-00 |
M1E, M2R |
Rods - General requirements and testing |
|
DIN 17672 |
SF-Cu |
Rods made of copper and copper alloys, properties |
|
DIN 40500 |
E-Cu57 |
Rods, profiles made of copper and copper alloys with silver |
|
|
European Standard |
Polish Standard |
German Standard |
||
|---|---|---|---|---|---|
|
|
EN 12167:2016 |
EN 13601:2016 |
PN 82/H93620 |
DIN 40500 |
DIN 17672 |
|
Temper |
Cu-DHP |
Cu-ETP |
E-Cu57 |
SF-Cu |
|
|
extruded |
M |
** |
p |
- |
|
|
drawn |
M |
D |
zh |
zh |
|
|
soft |
- |
R200/H035 |
F20 |
F20-F22 |
|
|
half hard |
R240/H065 |
R230-R250/H065 |
F25 |
F24 |
|